Transferring Sounds To The TX2000 Transmitter

For X360

Follow these steps to transfer sounds from your X360 to your TX2000 transmitter.

Critical: Verify Channel Settings

The X360 and TX2000 must be set to operate on the same channel prior to updating the category list. If they are not on the same channel, the list transfer will fail.

Before You Begin

Make sure you have fresh batteries in both your X360 and TX2000 remote control.

Safely eject the X360 from your computer if it was connected.

Disconnect all accessories (speakers, decoys, USB cables, etc.) prior to starting this process.

Transfer Instructions

  1. 1 Turn on the X360 and TX2000 remote control
  2. 2 Access the main menu on the TX2000 by pressing the back/menu button
  3. 3 Select the "TX2000 Settings" menu
  4. 4 Select the "Download List" item from the menu to initiate the transfer
  5. 5 You will be asked to confirm the list download. Select "Yes". Once the process is complete, you will see an overview on the screen showing how many sounds, FOXPILOT files, and categories have been detected during the transfer process
  6. 6 Exit the menu and return to your categories to review the changes you have made. If there were any problems during the transfer, the TX2000 will revert to the previous category list as a failsafe